CETTF1012-105 - Transition Networks CETTF1012-105 Ethernet Switch - 10BASE-T (RJ-45) [100 m/328...
- Part Number:
- CETTF1012-105
- Model Number:
- CETTF1012-105
- Make:
- TRANSITION NETWORKS
- Lead Time:
- Available
- Qty In Stock:
- Available
Transition Networks CETTF1012-105 Ethernet Switch - 10BASE-T (RJ-45) [100 m/328 ft.], 10BASE-FL 1310nm single mode (ST) [20 km/12.4 mi.] Simple Type: Ethernet Switch
Two 10BASE-T to 10BASE-FL Media Converters used back-to-back extend the distance between two 10BASE-T devices up to 5 km (3.1 mi.) using multimode fiber, up to 40 km (24.9 mi.) using single mode fiber without a repeater. Connect Unlike Devices Connect your workgroup to a distant server or a central switch; or extend distances between like and unlike devices in either full or half-duplex modes.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- AutoCross Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
- Automatic Link Restoration Transition Networks's converters will automatically re-establish link in all network conditions.
- Integrate mixed cabling environments using either switched or shared Ethernet.
- Link Pass Through Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.
- Point System Chassis Can be used with any Point System Chassis.
- Remote Firmware Upgrade
Specifications
- 3-position Jumper: Hardware: Converter mode is determined by 4-position switch settings, Software: Converter mode is determined by most recently saved on-board microprocessor setting
- 4-position Switch: Fiber Port: Enables/disables network traffic on the fiber port; (Up - enabled), Copper Port: Enables/disables network traffic on the copper port; (Up - enabled), AutoCross: Enables/disables AutoCross function; (Up - enabled), Link Pass Through: Enables/disables Link Pass, Through function; (Up - enabled)
- Dimensions: Width: 0.86” [22 mm], Depth: 5.0” [127 mm], Height: 3.4” [86 mm]
- Environment: See chassis specifications
- Power Consumption: 2.3 Watts
- Regulatory Compliance: EN55022; EN55024; EN61000; CE Mark, Class A
- Shipping Weight: 1 lb. [0.45 kg]
- Standards: IEEE Std. 802.3, 10BASE-T; 10BASE-FL
- Status LEDs: PWR (Power): On for normal operation;LKF (Link Fiber): Steady LED indicates good fiber link and normal operation;RXF (Receive Fiber): Flashing LED indicates data
- Warranty: Lifetime
Applications
- None Available
Aliases
- None Available
Related Items
CETTF1011-105
Transition Networks CETTF1011-105 Ethernet Switch - 10BASE-T (RJ-45) [100 m/328- CETTF1013-105
Transition Networks CETTF1013-105 Ethernet Switch - 10BASE-T (RJ-45) [100 m/328 - CETTF1014-105
Transition Networks CETTF1014-105 Ethernet Switch - 10BASE-T (RJ-45) [100 m/328 
CETTF1018-105
Ethernet Point System 10BASE-T to 10BASE-FL Media Converters Port 1: 10BASE-T (RJ-45) Port