Port 1: 10BASE5 (AUI) Port 2: 10BASE-FL 850nm MM SC (2 km)
Available in both multimode and single mode fiber optic versions.
LinkAlert Technology
Because most Ethernet technologies are unable to recognize downlink faults, a failed link may appear normal to network management, requiring unnecessary time devoted to troubleshooting. LinkAlert monitors all physical uplink and downlink failures and enables all faults to be detected by network management.
Multimode version can support fiber optic segments up to 2,000 meters.
Single mode version supports segments up to 15,000 meters in length.
Both multimode and single mode transceivers connect AUI male (DB-15) nodes to a fiber optic medium via a standard ST type connector in both full and half-duplex modes. The ability to operate in full-duplex mode allows for operation between switches, routers and servers using full-duplex Ethernet.
Multimode version takes advantage of full duplex transmission to increase data rates between devices up to 20 Mbps.
Long-Haul version, E-FRL-MC05(L), uses a 1300nm LED rather than the standard 850nm LED, so it can transmit and receive data over distances up to 5,000 meters. That's almost a 3,000-meter advantage over the standard 10BASE-FL distance of 2,000 meters.
Full/Half-Duplex 100BASE-FX Transceiver
Port 1: MII
Port 2: 100BASE-FX 1300nm MM SC (2 km)
Connects MII nodes via an ST or SC type connector, to a fiber optic medium in both full and half-duplex modes. (The ability to operate in full-duplex mode allows for operation between switches and routers using full-duplex Fast Ethernet.)
Support fiber optic segments up to 2,000 meters on multimode fiber.
Single mode version supports fiber optic segments up to 20,000 meters.
Just Convert-IT 100BASE-TX to 100BASE-FX Media Converters
Port 1: 100BASE-TX(RJ-45) [100 m]
Port 2: 100BASE-FX 1300nm multimode (SC) [2 km]
Simply upgrade twisted pair networks to fiber and end the problems of difficult installations associated with traditional converters. The "Just Convert-IT" line of media converters is there for when you want an inexpensive, no frills converter that offers the same quality and reliability as our full-featured line of products.
Managed Multiport Media Converters
Port 1: UTP
Port 2: 850nm MM ST (2 km)
Rack space saving: up to 12 ports in a 1U high enclosure
Reliability: Optional redundant power supply
Maintainability: directly removable/hot-swap power supply
FDX advertising to get more from your network
Fault Propagation with Link Test capability
Optional -48VDC power supply
- MiLAN Raven Series MIL-RC6113LX - Media converter - 1000Base-LX, 1000Base-TX, 100Base-TX - RJ-45 - SC single mode - external - up to 3 miles - 1310 nm
10/100 Bridging Stand-Alone Media Converters
Port 1: 10/100BASE-TX (RJ-45) [100 m]
Port 2: 100BASE-FX 1300nm multimode (ST) [2 km]
Bridging media converters will provide conversion and integration solutions for half duplex and full duplex environments.
- Transition Bridging Media Converter - Media converter - 10Base-T, 100Base-FX, 100Base-TX - ST multi-mode - RJ-45 - external - up to 1 miles - 1300 nm
- Transition Bridging Media Converter - Media converter - 10Base-T, 100Base-FX, 100Base-TX - ST multi-mode - RJ-45 - external - up to 1 miles - 1300 nm
10/100 Bridging Stand-Alone Media Converters
Port 1: (5) 10/100BASE-TX (RJ-45) [100 m]
Port 2: 100BASE-FX 1300nm multimode (SC) [2 km]
Bridging media converters will provide conversion and integration solutions for half duplex and full duplex environments.
10/100 Bridging Stand-Alone Media Converters
Port 1: (5) 10/100BASE-TX (RJ-45) [100 m]
Port 2: 100BASE-FX 1300nm single mode (SC) [20 km]
Bridging media converters will provide conversion and integration solutions for half duplex and full duplex environments.